User Guide
Front Size:427.5*210 Single page size:142.5*210 128g
彩色印刷
128g
铜版纸，绿色边框为刀模线，中间红线为折页线
Download and Install the APP
Enable your smart phone to scan QR code to download the APP.
Also you can search“
TT Lock
" on APP store or Google play to
download the APP.
Scan to download app
Add a new user with an RFID card ( 200 at most):
*85#
2
Modify Code
*12#
Modify Admin Code
a. Enter *12#
b. Input old admin code#
c. Input new admin code#
d. Repeat the new admin code#
Admin
Code#
Admin
Code#
New
Code#
New
Code#
a. Enter *85#
b. Input admin code#
c. Swipe the card
Tips: If your smartphone support NFC, copy the registered RFID card to your
smartphone, the phone will be the key to unlock.
a. Enter *71#
b. Input admin code#
Delete ALL Access Codes:
Delete User
*71#
a. Enter *69#
b. Input admin code#
Delete ALL RFID Cards:
*69#
4
Demo Mode
The demo mode is turned off by default, when not register the admin code,
enter
24679#
will open the demo mode.
During the demo mode, input 123456# or any cards can unlock.
After registering the admin, the demo mode will be invalid automatically.
5
Long press the Reset button, when hear “please input initialization passcode”,
input
000#
, reset successfully.
All code/card/phone users will be deleted.
Reset the Lock
6
Admin
Code#
Admin
Code#
Scrambling Code To Anti Peep
Users may enter any random digits before or/and after the correct passcode and can
still gain access, make sure strangers can’t steal your passcode by watching your
nearby when you enter the passcode.
Low Battery Alert
When battery power is lower than 4.8V, each time waking up the keypad, buzzer will
make alert”Low battery, please replace the batteries”, the keypad light flashes 1s.
Please change with new Alkaline batteries, don’t mix new and old batteries.
7
8
3
*10#
User
Code#
Modify User Code
a. Enter *10#
b. Input old user code#
c. Input new user code#
d. Repeat the new user code#
Manage the Language
If not register the admin code, the default admin code is 123456
1#
Chinese
*39#
2#
English
New
Code#
New
Code#
Admin
Code#
1
Add administrator (only 1):
a. Enter *12#
b. Input 123456# (the initial code)
c. Input admin code# (4-9 digits)
d. Repeat admin code#
123
456#
Code#
Create NEW Access
Add a new user with an access code (150 at most):
a. Enter *85#
b. Input admin code#
c. Input user code# (4-9 digits)
d. Repeat user code#
Admin
Code#
If you don’t want to use the App, you may follow the programming instructions below.
Setting via lock
Code#
Code#
Code#
*85#
*12#
