McGrath Locks MLM818, Быстрый старт

Страница: 7 / 8

7
Installation Diagram
1. Drill a large and a small hole on the
door for the front and rear panel and
drill a round hole on the door frame
for the deadbolt according to the 1:1
template.
2. Insert the deadbolt into the hole of
the door frame and fix it with 2
screws.
3. Insert the thin bar of the front panel
into the hole of the deadbolt in a
vertical status, and then put the
cable wire of the front panel through
the door hole to the inside of the
door.
4. Pass the cable wire through the
small square hole on the right side
of the mounting plate, and then fix
the mounting plate and the front
panel with 3 screws.
5. Remove the battery cover. If the
lock is for right-open, keep the knob
in the vertical direction and the
moving switch in PCB is in R
position. (If the lock is for left-open,
keep the knob in horizontal position,
the moving switch in PCB is in the L
position)
6. Insert the plug of the front lock into
socket of the rear lock and insert the
thin bar into the hole of the knob.
7. Fix the rear panel on the mounting
plate with 3 screws
8. Load 4 AA alkaline batteries in the
battery holder of the rear panel, and
then fix the battery cover with a
screw.
9. According to the actual size of the
strike box, drill a hole on the door
frame, insert the strike box, and
cover the strike plate, and fix it with 2
screws. Test and debug: Turn the
knob of the rear panel to check
whether the deadbolt protrudes and
retracts smoothly; insert the
mechanical key to check whether the
deadbolt protrudes and retracts
smoothly; program the password
and the card, use the password and
the card to unlock to check whether
it is sensitive; open/close the door to
check whether the deadbolt
protrudes and retracts in and out of
the strike box smoothly, if it is not
smooth and misaligned, please
adjust it until it is perfect.
10. If auto-locking is required when
close door, pls add magnetic device
MLM818