Operation
Read before Operating
Before operating this machine, please read this manual thoroughly
and keep a copy with the machine for future reference.
TX00838-1-5-96
PH010
54
-2
-2
0-
97
Cutting Rough Cut Segment
Allow the joint to cool before producing
samples.
Mark out a 1 inch section of the pipe
about 12 inches to 18 inches long with
the fusion joint centered between the
ends of the pipe. Testing specifications
may require multiple coupons from the
same fusion joint.
Cut the pipe on the designated markings using a reciprocating saw,
chain saw, or band saw.
IMPORTANT:
The use of a drill to make saw starting holes may be
useful if sawing from a large section of pipe.
The result should be a rough cut segment that is roughly 1 inch thick
and 12 to 18 inches wide.
TX04367-11-1-11
3 - 1
PH
04
56
0-10
-10
-11
CD00
98
6-11-
7-11
PH
04
55
9-10
-10
-11
12" to 18"
310mm to 450mm
Fusion joint centered
1" (25.4mm)
1" (25.4mm)
Cut straight
and parallel
cross section
1"
Pipe Thickness
12" to 18"
