McDonald's CORNELIUS AUTOMATED BEVERAGE SYSTEM Скачать руководство пользователя страница 3

Страница: 3 / 59

Automated Beverage System

SAFETY INSTRUCTIONS

EAD

AND

OLLOW

ALL S

AFETY

NSTRUCTIONS

Safety Overview

• Read and follow

ALL SAFETY INSTRUCTIONS

in this manual and any warning/caution labels on the unit

(decals, labels or laminated cards).

• Read and understand ALL applicable OSHA (Occupational Safety and Health Administration) safety

regulations before operating this unit.

Recognition

IFFERENT

YPES

LERTS

DANGER:

Indicates an immediate hazardous situation which if not avoided

WILL

result in serious injury, death or

equipment damage.

WARNING:

Indicates a potentially hazardous situation which, if not avoided,

COULD

result in serious injury, death, or

equipment damage.

CAUTION:

Indicates a potentially hazardous situation which, if not avoided,

MAY

result in minor or moderate injury

or equipment damage.

AFETY

IPS

• Carefully read and follow all safety messages in this manual and safety signs on the unit.

• Keep safety signs in good condition and replace missing or damaged items.

• Learn how to operate the unit and how to use the controls properly.

• Do not let anyone operate the unit without proper training. This appliance is not intended for use by very young

children or infirm persons without supervision. Young children should be supervised to ensure that they do not
play with the appliance.

• Keep your unit in proper working condition and do not allow unauthorized modifications to the unit.

Recognize Safety Alerts

This is the safety alert symbol. When you see it in this manual or on the unit,

be alert to the potential of personal injury or damage to the unit.

Содержание CORNELIUS AUTOMATED BEVERAGE SYSTEM



























































Результаты поиска

Содержание CORNELIUS AUTOMATED BEVERAGE SYSTEM

Отзывы:

Похожие инструкции для CORNELIUS AUTOMATED BEVERAGE SYSTEM

Бренды по названию

Популярные бренды

McDonald's CORNELIUS AUTOMATED BEVERAGE SYSTEM, Руководство оператора

Результаты поиска

Содержание CORNELIUS AUTOMATED BEVERAGE SYSTEM

Отзывы:

Похожие инструкции для CORNELIUS AUTOMATED BEVERAGE SYSTEM

Бренды по названию

Популярные бренды