10
the ground contours rather than across them.This will often stabilise
the effect.
*In heavily mineralised areas the operator may need to sweep the coil
10-20mm above the ground.This should give a more stable Threshold
and less ground noise.
*Very sudden or large changes in the mineralisation of an area may
produce a signal from the detector.Usually this signal is very broad and
often only present in one direction.
Note:
The MCD Series are‘motion’detectors.This means the coil must
be moving the target,or the target moving over the coil,in order from
the detector to‘see ’it.
After-sale Service:
Thank you for choosing our devices. We are ready to offer high-class
after-sales service.
The services include:
1. Choose the close appointed repair unit if you want to have a
maintenance service.
2. If there is any question or difficulty in maintenance, please contact
the local repair center.
The guarantee service is not applicable to the security check devices in
one of the following conditions. However, they can be repaired with
some charge.
1. The trademark or the series number of the device or parts is torn or
changed.
2. The device is damaged by improper use, maintenance, or storage.
3. The device is damaged by unavoidable force.
4. The device has been maintained by non-appointed repair unit or
personally.
5. The device has been combined or assembled with devices from other
All manuals and user guides at all-guides.com
all-guides.com
