Elektronik GmbH
USB hub 3.0 8-Port
Manual
Seite 15 von 22
9.2.
Program settings
Basic settings are configured under
Setup –> Options
. The default settings are sufficient for an initial
commissioning.
A name can be given to the USB hub here.
If multiple USB hubs are connected, here you can select which of the names specified above
should be controlled.
These two checkboxes should always be set.
Determines the number of lines on which USB hubs are shown. If this is zero, it is automatically
set depending on the size of the window.
Here, USB ports can be given names, e.g. the names of the connected devices. The same names
are used for associated relay multiplexer outputs.
In "USBHub6", the number of USB hubs to be controlled can be configured. New USB hubs are
given the name "USBHub" with an incrementing number.
3
4
5
1
4
5
3
1
2
2
6
6
