11
Top Innovations, Inc.
U
SING
T
HE
F
ABRIC
S
TEAMER
OPERATING THE F
ABRIC
S
TEAMER
1.
Make sure that Water Tank is filled with water and placed correctly onto main
unit, and that Fabric Brush is securely attached if you wish to use it.
2.
Plug power cord into a convenient 3-prong electrical outlet (FIGURE 12).
3.
Switch Lighted On/Off Switch to “On” position (FIGURE 13).
4.
Unit requires approximately 35-40 seconds for boiler to heat. Once it has heated,
Fabric Steamer will begin producing a flow of steam.
NOTE: It is common for unit to produce gurgling sounds and small
amounts of water during the first few minutes of steaming. This is a natural
part of the steaming process. Pointing Steam Nozzle towards the ground and
shaking it gently may help to remove excess water from Steam Hose more
quickly (FIGURE 14).
5.
Once steam flow is steady and excess water has been removed from Steam Hose,
you may proceed with your steaming tasks. Refer to
Tips for Using the
Fabric Steamer
guide on page 12 of this manual for more information about
steaming garments and other fabrics.
6.
When you have completed your steaming tasks, immediately switch Lighted
On/Off Switch to “Off” position and unplug power cord from electrical outlet.
Refer to
Proper Storage
section on page 13 of this manual for information on
proper cleaning and storage of Fabric Steamer.
FIGURE 12
FIGURE 13
FIGURE 14
