McCulloch Electramac 235 Скачать руководство пользователя страница 8

Страница: 8 / 15

ENGLISH – 5

sure that the

cable/

extension cord is kept behind the

user, controlling that it does not create a source of
danger for the user or for other persons, and check
that it cannot be damaged (by heat, sharp objects,
sharp edges, oil, etc); Always assume a stable
standing position on both legs; keep the handles dry
and clean; during use keep all body parts and
clothing well clear of the

chain

; turn off the

switch

wait until the chain has stopped turning, and activate
the

chain brake lever

before putting down the saw;

never attempt to cut at heights over shoulder height;
always handle the machine with the utmost care;
check that the oil level never drops below MIN level,
controlling frequently, before and during use; Always
remain on the left hand side of the machine during
use, and take great care if the

bar

needs to be

inserted in a previously cut slit; remove the

bar

from

the slit when the

chain

is still in rotation.

12. Transport and storage precautions.

Each time

the work area is changed to another location,
disconnect the machine from the main line and
activate the

chain brake lever.

Mount the

guide bar

cover guard

each time before transporting or storage.

Always carry the machine by hand with the

bar

facing

backwards, or when transporting the machine in a
vehicle, always attach it securely to prevent damage.
Never carry the machine by the

cable.

After use,

store the machine in a dry, high place, far from heat
sources and out of reach of children.

13. Precautions against fire risk.

Never use the

machine in areas where there are naked flames,
inflammable or potentially explosive materials.

14. Kickback reaction.

The kickback reaction

consists of a violent upwards-reverse action of the

bar

towards the user. This generally occurs if the

upper part of the bar nose (called the “kickback
danger zone”) comes into contact with some object,
or if the

chain

is blocked in the wood. The kickback

reaction is a very quick sudden motion along the bar
cutting plane (generally in an upward direction, but
this also depends on the machine position during
cutting action). Kickback can make the user loose
control of the machine provoking dangerous and
even mortal accidents (i.e: if the saw with the chain in
rotation is thrust back against the user). The

chain

brake lever

and other safety devices are not sufficient

to protect the user against injury: the user must be
well aware of the conditions that can provoke the
reaction, and prevent them by paying very close
attention according to experience, together with
prudent and correct machine handling (for example:
never cut several branches at a time because this
can cause accidental impact on the “kickback danger
zone”; never mount incorrect

bars

chains

; make

sure the

chain

is always sharp and sharpen

according to correct methods, because incorrect
sharpening can cause kickback; when choosing the

bar

, remember that the smaller the nose radius, the

smaller the kickback danger zone).

C. SAFETY EQUIPMENT DESCRIPTION

1,3,6,8,12