McCulloch 577615706 Скачать руководство пользователя страница 27

Страница: 27 / 232

3. Attach the air filter and make sure that the air filter

seals tightly against the filter holder.

Note:

Because of different work conditions, weather

or season, your product can be used with different types

of air filter. Speak to your servicing dealer for more

information.

To do a check of the spark plug

CAUTION:

Use the recommended

spark plug. Refer to

Technical data on page

. An incorrect spark plug can cause

damage to the product.

1. If the product is not easy to start or to operate or if

the product operates incorrectly at idle speed,

examine the spark plug for unwanted materials. To

decrease the risk of unwanted material on the spark

plug electrodes, do these steps:
a) make sure that the idle speed is correctly

adjusted.

b) make sure that the fuel mixture is correct.
c) make sure that the air filter is clean.

2. Clean the spark plug if it is dirty.
3. Make sure that the electrode gap is correct. Refer to,

Technical data on page 33

4. Replace the spark plug monthly or more frequently if

necessary.

To sharpen the saw chain

Information about the guide bar and saw chain

WARNING:

Use protective gloves

when you use or do maintenance on the

saw chain. A saw chain that does not move

can also cause injuries.

Replace a worn or damaged guide bar or saw chain with

the guide bar and saw chain combination recommended

by McCulloch. This is necessary to keep the safety

functions of the product. Refer to

Accessories on page

, for a list of replacement bar and chain

combinations that we recommend.
• Guide bar length, in/cm. Information about the guide

bar length can usually be found on the rear end of

the guide bar.

• Number of teeth on bar tip sprocket (T).

• Chain pitch, in. The distance between the drive links

of the saw chain must align with the distance of the

teeth on the bar tip sprocket and drive sprocket.

PITCH =

• Number of drive links. The number of drive links is

decided by the type of guide bar.

• Bar groove width, in/mm. The groove width in guide

bar must be the same as the chain drive links width.

1733 - 002 - 23.11.2021

Содержание 577615706









































































































































































































































Результаты поиска

Содержание 577615706

Отзывы:

McCulloch 577615706, Руководство оператора, Страница: 27 / 232

Результаты поиска

Содержание 577615706

Отзывы: