manualshive.com logo in svg

McCulloch 577615706, Руководство оператора, Страница: 20 / 232

Поделиться
Скачать
McCulloch 577615706 Скачать руководство пользователя страница 20

1. If the usable cutting length is longer than the tree

diameter, do these steps (a-d).
a) Make a bore cut straight into the trunk to

complete the felling hinge width.

b) Cut on the pull stroke until ⅓ of the trunk is left.
c) Pull the guide bar 5-10 cm/2-4 in rearward.
d) Cut through the remaining of the trunk to

complete a safe corner that is 5-10 cm/2-4 in

wide.

2. If the usable cutting length is shorter than the tree

diameter, do these steps (a-d).
a) Make a bore cut straight into the trunk. The bore

cut must extend 3/5 of the tree diameter.

b) Cut on the pull stroke through the remaining

trunk.

c) Cut straight into the trunk from the other side of

the tree to complete the felling hinge.

d) Cut on the push stroke, until ⅓ of the trunk is left,

to complete the safe corner.

3. Put a wedge in the kerf straight from behind.

4. Cut off the corner to make the tree fall.

Note: 

If the tree does not fall, hit the wedge until it

does.

5. When the tree starts to fall, use the path of retreat to

move away from the tree. Move a minimum of 5

m/15 ft away from the tree.

To free a trapped tree

WARNING: 

It is very dangerous to

remove a trapped tree and there is a high

accident risk. Keep out of the risk zone and

do not try to fell a trapped tree.

The safest procedure is to use one of the following

winches:
• Tractor-mounted

• Portable

20

1733 - 002 - 23.11.2021

Содержание 577615706









































































































































































































































Отзывы:

Нет отзывов