McConnel ROBOPOWER, Руководство оператора

Страница: 96 / 138

*($55('8&7,2181,76
0DOIXQFWLRQV &DXVH 6ROXWLRQ
Oil seeping from the seals Stiffening through being stored for
too long. Clean the area and check in a day or
two
Damage or slight wear Apply to a customer care centre.
Excessive amount of lubricant Checking the oil level
Vibrations and/or excessive nosiness Wheel gear reduction unit not in-
stalled properly Apply to a customer care centre
Internal anomalies
Badly lubricated or defective bear-
ings
Teeth with bruises or chipping
Multiple disk parking brake cannot be
released No pressure in the braking circuit. Check the brake connection
Bonding of the disks due to the
length of time parking. Apply pressure to the brake and
make the wheel turn by activating the
engine.
Defective brake hold Apply to the customer care centre
Multiple disk parking brake cannot be
engaged. Residual pressure in the circuit Check the hydraulic circuit
Worn discs Apply to a customer care centre
When the engine is in operation the
gear reduction unit does not turn Wrong engine installation Check the coupling between the en-
gine and the wheel reduction unit.
Brakes locked Check the braking system
Internal anomalies Apply to a customer care centre
Disengaged wheel reduction unit See the DISENGAGEMENT para-
graph
Excessive heating Too much or too little oil Check the oil level.
Unsuitable lubricant Check the type and state of the
lubricant.
Badly lubricated or defective bear-
ings Apply to a customer care centre
Multiple disc brake does not open
completely Check the pressure of the brake
opening
High thermal power Apply to a customer care centre.
83