1--1
©
2015 Mobile Climate Control
T-367Rev. 05/2015
SECTION 1
DESCRIPTION
1.1 INTRODUCTION
This manual contains Operating Instructions,
Service Instructions and Electrical Data for the
EcoXcel Model Air Conditioning and Heating
equipment furnished by Mobile Climate Control as
shown in Table 1-1.
The system is identified with a Model/Serial number
tag located inside the evaporator section, on the rear
bulkhead wall of the assembly. Example is shown in
Figure 1-1.
Models consists of a Rooftop unit containing the
condensing section, the evaporator sections and
engine compartment mounted compressor. To
complete the system, the air conditioning and
heating equipment interfaces, electrical cabling,
refrigerant piping, engine coolant piping (for
heating), duct work and other components
furnished by Mobile Climate Control and/or the bus
manufacturer.
Additional support manuals are shown in Table 1-2.
Operation of the unit is controlled automatically by a
Mobile Climate Control Microprocessor based
controller. The controls maintain the vehicle's
interior temperature at the desired set point.
Table 1-1 Models
Model
Voltage
Controller
With Heat
Single Loop
W/Covers
50-2104
24 VDC
MCC EcoTemp NG
Microprocessor
Yes
X
X
T50-2112
24 VDC
MCC EcoTemp NG
Microprocessor
Yes
X
X
Table 1-2 Additional Support Manuals
MANUAL NUMBER
EQUIPMENT COVERED
TYPE OF MANUAL
T-367PL
Eco Xcel Models
Service Replacement Parts List
