16
Use of speed bar
Your AROLLA 3 is equipped with a highly efficient speed
system. For fitting and positioning of the accelerator
system and speed bar, consult the instructions provided by
your harness manufacturer.
Before each take-off, check that the entire accelerator
system works freely and that the lines are long enough
to prevent the speed bar from being activated involuntarily
in flight (speed lines too short).
If the harness is fitted with a front mounted reserve, the
speed bar lines must pass under the reserve container and
the reserve bridle so that the reserve can be deployed
correctly.
Use of the speed bar increases the maximum speed of the
paraglider by up to 25% of the trim speed. Whilst the
AROLLA 3 remains stable at full speed, no paraglider is
immune from deflations in certain conditions and the
deflation point can be sudden when flying at high speed.
Use of the speed system does reduce the angle of attack
and there is therefore an increased risk of a frontal or
asymmetric collapse. For this reason we do not advise the
use of the speed system near to the ground or in turbulent
air.
Содержание AROLLA 3
Страница 1: ...1 AROLLA 3 Owner s manuel 03 2021...
Страница 26: ...26 Plan of the lines AROLLA 3 XXS XS S M L...