... wir bewegen was !!!
Page 5
U
S
E
R
I
N
S
T
R
U
C
T
I
O
N
S
-
"M
cB
U
LL
®
"
-
W
ir
e
R
o
p
e
P
u
ll
in
g
H
o
is
t
Operating:
Attach the hook to the load and operate as following:
To lift a load (or pull a load):
move the forward handle forward and backward
To lower a load:
move the backward handle forward and backward
Rope removing:
After finishing work, first push the released handle, to open the grip jaws and
pull the rope out. Erase the dirt on the rope and wind it orderly on to the reel.
Press down the released handle that the grip jaws are not always in an open
state, thus the spring force of the tensioning spring will be reduced.
Warning
To avoid damage and/or personal injury:
1. Do not exceed maximum load of the wire rope pulling hoist!
2. Do not use the wire rope pulling hoist to lift people or loads over people!
3. Do not use a damaged or malfunctioning wire rope pulling hoist!
4. Do not use if the rope is worn (diameter reduces by 10%), or damaged!
5. Do not use the wire rope pulling hoist unless the hoist’s frame and rope
from a straight line between hook and anchor pin!
6. Do not use the wire rope pulling hoist if the hoist’s frame is in contact
with any object!
7. Do not leave a suspended load or wire rope pulling hoist under tension
unattended!
8. Do not use an extension on the handle. Operate using hand power only!
9. Do not apply loads to the tip of hooks or to the hook latches!
10. Never operate the wire rope pulling hoist when flammable materials or
vapors are present. Contact between metal parts may produce sparks
that can cause a fire or explosion!
