At any time during configuration, you can type a question mark (
?
) to get help on the Sensor CLI commands.
For a list of all commands, type
commands
.
a
Log on to the Sensor using the terminal connected to the Console port.
b
At the prompt, log on using the default Sensor user name
admin
and password
admin123
.
c
Optional, but recommended. Change the Sensor password. At the prompt, type:
passwd
. The Sensor
prompts you to enter the new password and prompts you for the old password.
A password must contain between 8 to 25 characters, is case-sensitive, and can consist of any
alphanumeric character or symbol.
d
Set the name of the Sensor.
You can enter the
setup
command at the prompt. This automatically prompts you to provide
the information shown in items d through g and item j. Alternatively, you can use the set
command. If you use the
set
command, manually enter the complete command syntax as
shown in items d through g and item j.
At the prompt, type:
set sensor name <word>
.
Example:
set sensor name HR_sensor1
The Sensor name is a case-sensitive character string up to 25 characters. The string can include
hyphens, underscores, and periods, and must begin with a letter.
e
If the Sensor is not on the same network as the Manager, set the address of the default Gateway. At the
prompt, type:
set sensor gateway <A.B.C.D>
Example:
set sensor gateway 192.1.1.1
f
Set the IP address of the Manager server. At the prompt, type:
set manager ip <A.B.C.D>
.
Example:
set manager ip 192.2.2.2
9
