McAfee M-3050 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 42

McAfee M-3050 Скачать руководство пользователя страница 15

2

Before you install

This chapter describes the best practices for deployment of Sensors in your network. Topics include
the safety considerations for handling the Sensor, usage restrictions that apply to the Sensor model,
and the contents that are shipped along with the Sensor.

Contents

  Usage restrictions
  Safety measures
  About fiber-optic ports
  Contents of the box
  Unpack the Sensor

Usage restrictions

The following restrictions apply to the use and operation of a Sensor:

• You should not remove the outer shell of the Sensor. Doing so will invalidate your warranty.

• The Sensor appliance is not a general purpose workstation.

• McAfee prohibits the use of the Sensor appliance for anything other than operating Network

Security Platform.

• McAfee prohibits the modification or installation of any hardware or software on the Sensor

appliance that is not part of the normal operation of Network Security Platform.

Safety measures

Please read the following warnings before you install the Sensor. These safety measures apply to all
Sensor models unless otherwise noted. Failure to observe these safety warnings could result in serious
physical injury.

2

McAfee

®

Network Security Platform

M-3050/M-4050 Sensor Product Guide

15

«
...
13
14
15
16
17
...
»

Содержание M-3050











































Отзывы:

Нет отзывов