manualshive.com logo in svg

McAfee M-3050, Руководство по эксплуатации продукта, Страница: 12 / 42

Поделиться
Скачать
McAfee M-3050 Скачать руководство пользователя страница 12

LED

Status Description

Pwr A (Power A)
OK

~AC

Green
Amber
Green

Power Supply A is functioning.
Power Supply A is not functioning.
Power Supply in AC mode.

Pwr B (Power B)
OK

~AC

Green
Amber
Green

Power Supply B is functioning.
Power Supply B is not functioning.
Power Supply in AC mode.

If a power supply is not present, both green and amber LEDs are off.

Management Port Speed

Green
Amber
Off

The port speed is 1000 Mbps.
The port speed is 100 Mbps.
The port speed is 10 Mbps.

Management Port Link

Green
Off

The link is connected.
The link is disconnected.

Sys

Green
Amber

Sensor is operating.
Sensor is booting. (It could also indicate a system failure).

Fan

Green
Amber

All three fans are operating.
One or more of the fans has failed.

Temp

Green
Amber

Inlet air temperature measured inside chassis is normal.

(Chassis temperature OK).
Inlet air temperature measured inside chassis is too hot.

(Chassis temperature too hot).

Flash

Green
Off

Activity on external compact flash.
No activity on external compact flash.

Gigabit Ports (SFP / XFP) Act Amber

Off

Data transferring.
No data transferring.

Gigabit Ports (SFP / XFP)

Link

Green
Off

The link is connected.
The link is disconnected.

Response Port Speed

Green
Amber
Off

The port speed is 1000 Mbps.
The port speed is 100 Mbps.
The port speed is 10 Mbps.

Response Port Link

Green
Off

The link is connected.
The link is disconnected.

Fail-Open Control FO

Green
Off

The Sensor is providing power to the fail-open kit.
The Sensor is not providing power to the fail-open kit.

Fail-Open Control Port Err

Amber
Off

The fail-open control cable is disconnected or the Sensor is

operating in bypass mode.
There is no error.

1

Overview

M-3050/M-4050 physical description

12

McAfee

®

 Network Security Platform

 M-3050/M-4050 Sensor Product Guide

Содержание M-3050











































Отзывы:

Нет отзывов