MC EMC64Z, Руководство пользователя

Страница: 22 / 25

用户手册/
User's Manual
第
22
页 共
25
页
4.1 EMC64Z 安装/EMC64Z installation
单位/Unit：mm
安装孔直径/Diameter of mounting hole:4.5mm
5 常见问题/Frequently asked questions
问题
Questions 解决问题的建议
Advice on how to solve a problem
电机不转动
Motor not turning 确认控制器的 ATYPE 有配置正确
Verify that the controller's ATYPE is configured correctly
确认脉冲发送方式和驱动器的输入脉冲方式是否匹配
Verify that the pulse mode is matched to the driver's input pulse
mode
确认是否有硬件限位，软件限位，ALM 信号起作用
Verify that the hardware, software, and ALM signals are active
可以用测试软件进行测试，观察脉冲计数等是否正常
Can use the test software to test, observe whether the pulse
count is normal or not
控制器已经正常工作，正常发出
脉冲，但电机不转动
The controller is working
properly, sending out pulses
normally, but the motor is not 检查驱动器和电机之间的连接是否正确，驱动器与控制器之间的接线
是否接触良好
Check that the connection between the drive and the motor is
correct and that the wiring between the drive and the controller
is in good contact