- 8 -
How to Control Excess Foam in the Recovery Tank
Watch the liquid as it accumulates in the recovery tank. If you notice excess foaming,
stop the machine. Add the recommended amount of chemical defoamer in the recovery
tank.
How to Empty the Recovery Tank
Open the Recovery Drain Hose (4) to empty the Recovery tank.
Maintenance
Daily
1.
Empty and rinse the recovery tank with clean water. Leave the tank cover open on
top to air dry.
2.
Remove the squeegee assembly, rinse and wipe clean. Check the squeegee inlet for
clogs or debris.
3.
Clean and wipe the tops of batteries with an ammoniated window cleaner.
4.
Charge the batteries as described in this manual.
Weekly
Never test the strength of the battery unless it is fully charged and cool.
Check the battery cells with a hydrometer.
Monthly
1.
Lubricate brush and squeegee lift mechanisms with light oil.
2.
Check for wear or damage of clutch plate, brushes, pads or squeegee blades.
3.
Clean all battery terminals.
4.
Check all electrical connections and tighten if any are loose.
5.
Clean the entire machine with all purpose cleaner.
