MC Technologies GmbH
32
1.8 I/O
The router switch output can be controlled remotely or switched using a router connection status.
1.8.2 Outputs
The switch input can be used to send emails. Please check to see if the switch input is already being used to start a
VPN connection. If so, it will not be possible to use it to send emails.
1.8.1 Inputs
Note:
To send an email, the email account under the section 1.9.8 (see Page 40-41) SMTP Configuration must
be set up.
The router has an I/O input and output (Input/Output).
Inputs
High
E-Mail:
If activated, an email will be sent when there is a "High" level on the switching input.
Select "E-Mails" and click "Apply".
Following this, click "Edit" and fill out the email form.
None:
No email is sent.
Low
E-Mail:
If activated, an email will be sent when there is a "Low" level on the switching input.
Select "E-Mails" and click "Apply".
Following this, click "Edit" and fill out the email form.
None:
No email is sent.
