MC Technologies MC-LR Скачать руководство пользователя страница 23

Страница: 23 / 48

User Manual/Web Interface MC-LR/MC-LR-4/MC-LRS/MC-LRS-4 – 01/2018 (FW 2.07.3)

OpenVPN Connections

OpenVPN Tunnel

Proxy

None:

No proxy is used.

http:

An http proxy either with or with authentication is used.

socks:

A socks proxy either with or with authentication is used.

Proxy Server

Proxy server’s URL or IP address.

Proxy Port

Proxy server’s port.

Username

User name for authentication.

Password

Password for authentication.

Select an OpenVPN connection and click

Edit

If your Internet connection is via a proxy server, you can carry
out the required settings here.

OpenVPN Proxy settings

OpenVPN Bridge

Name

Arbitrary name of OpenVPN connection.

VPN

Enabled:

OpenVPN Tunnel activated.

Disabled:

OpenVPN Tunnel deactivated.

Remote Host

IP address or URL of the remote peer to which the tunnel will be established.

Remote Port

Port of the remote peer to which the tunnel will be established (default 1194).

Device Type

TAP for a TAP-OpenVPN-Connection, TUN for a TUN-OpenVPN-Connection.

Protocol

Protocol selection (UDP or TCP).

LZO Compression

Disabled:

Switched off or not allowed.

Adaptive:

(Data) adaptive compression switched on.

Yes:

Switched on but can be switched off from the server.

No:

Switched off but can be switched on from the server.

Enabled:

Compression allowed; type of compression determined by the server.

Allow Remote Float

Activate this option to accept authenticated packets from each IP address during OpenVPN
connection. This option is recommended if IP addresses are used for dynamic communication.

Redirect Default

The default gateway is directed via the tunnel.

Gateway

Local Port

Determines a fixed port for the OpenVPN client.

Содержание MC-LR

















































Результаты поиска

Содержание MC-LR

Отзывы:

Похожие инструкции для MC-LR

Бренды по названию

Популярные бренды

MC Technologies MC-LR, Руководство пользователя

Результаты поиска

Содержание MC-LR

Отзывы:

Похожие инструкции для MC-LR

Бренды по названию

Популярные бренды