User’s manual
SEEDER MONITOR MCK 800
14
5. Using the Seeder Control MCK 800
1)
Power on the monitor by pressing the “ON - OFF” key. The instrument will
perform for 1 second a brief test by activating the acoustic alarm and lighting
up all the display segments; after this test, working hours will be displayed
for 3 seconds.
2)
To reset the totalizators (partial and total area worked in hectares), hold
down the corresponding key until the display views “0.00” (see picture 2).
To reset working hours, hold down any key for about 3 seconds while the display
visualizes working hours (after the initial test operated at the switching on). After
working hours, the monitor displays the rows which are operative as lit segments.
Segments which are off represent rows that are not checked by the monitor. When a
row does not sow regularly, the corresponding display segment starts flashing and an
intermittent audible alarm is given, which will sound for 5 seconds.
To display worked area and working width press the corresponding keys. The monitor
will display again the rows segments after 6 seconds.
RESETTING THE TOTALIZATORS
Figure 2
