5
HOT-LOOP
A. Set LOOP memory: Set a LOOP playback first and then press MEMO to do the LOOP record. Press a certain LOOP bank to finish the
LOOP record. The LED of the set LOOP button will become orange.
B. Play” LOOP” memory: Press the set LOOP bank to perform this function.
9. MEMO
Press it can set memory ready to record a Hot Loop or a Hot Cue.
◎
Hold MEMO and dial the jog wheel to preset the beat length of Auto Loop. Then MEMO will illuminate. This means it’s ready to execute
the auto loop playback. Pressing IN will auto form an auto loop according the beat length you set. The bar range of auto loop can be
selected from 1/32~32/1. Use the TRACK knob to trim the loop length.
10. LOOP
1. Press A to memorize a start point and press B to memorize an end point. Then the Loop starts playing.
2. Press B again to edit the Loop playback. The length of the Loop playback can be enlarged or shortened by turning the jog wheel.
3. Press the RELOOP to exit or call the Loop playback.
4. When a loop is formed, turn TRACK to trim the loop double or half.
Auto loop
There is also an auto loop function to assist in obtaining seamless loops. Press and hold the MEMO button, then using the jog wheel to
preset the loop playback range from 1/32~32/1. The memo button will stay illuminated and this means that the auto loop function is ready to
trigger the loop playback. To start the loop, press the A button at the desired start point. The loop playback will form automatically from the
preset time you set.
◎
1/1 equals to one bar or 4 beats. When auto loop playback starts, the loop length is still editable by using the TRACK knob.
11. REVERSE
Press it to activate Reverse effect.
12. BRAKE
Hold this button and dial the jog wheel to adjust the time of start and break simultaneously. The range is from 0.5 to 6 seconds.
Press it to set START/BRAKE effect ready. Press PLAY/PAUSE button to execute the effect.
13. CUE
In pause mode, press this button to set a memorized point for instant play; in play mode, press this button to pause the music and
return to the memorized point.
Holding down this button will start the playback from the cue point. Releasing it will pause the track and return to the cue point.
14. PLAY/PAUSE
Press this button to start the playback or let the playback pause.
15. DISPLAY
Indicating all the functions as they are occurring.
16. EJECT
Press to eject the disc.
◎
Disc can’t be ejected unless CUE or PAUSE button has been pressed first.
17. FX ON/OFF
These buttons will activate Flanger, Filter, Echo, PAN and CHOP effects. Press Relay to switch between Gain & Parameter (the
selected one will be blinking) showing in the display. Use the jog wheel to change the value of them.
Flanger: Gain- 0~100, Parameter: 1/32~ 16/1
Filter: Gain- 0~100, Parameter: -60~+60
Echo: Gain- 0~100, Parameter: 1/32~1/1
PAN: Gain- 0~100, Parameter: 1/32~1/1
CHOP: Gain- 0~100, Parameter: 1/32~1/1
18. FX SELECT
Press it to switch among five digital effects.
