39
10. Commissioning
TIME
Use the TIME (10) button to switch between the different times displayed (elapsed track time > remaining track
time > total remaining time) on the LC display (8).
•
Push the TIME button (10) until the desired time display appears in the LC display.
The total remaining time is only displayed for audio CDs. With MP3 music files, the total playing time is
not displayed.
SINGLE Playback
SINGLE :
For single track playback, the device enters pause mode after each track played. The CUE mark
is automatically set to the beginning of the new track.
•
Use the button SINGLE (11) to select single track playback. In the playback mode SINGLE, the display shows
"SINGLE".
REPEAT Playback
REPEAT 1: The current track is repeated continually (single track repeat).
REPEAT ALL: This setting continually repeats the selected playback source.
•
Select the single track repeat function or continuous repeat function with the REPEAT button (12). The corre-
sponding setting appears in the LC display (8).
SCRATCH Function
When the SCRATCH (vinyl) function is activated, you can scratch the track selected with the JOG wheel (4) on a
record player.
•
Select the function SCRATCH with the button JOG MODE (22). The button JOG MODE (22) flashes with the
function active.
•
Now turn the JOG wheel (4) to scratch.
Title Programming
•
To start programming, the CD player must be switched to pause mode. A maximum of 20 tracks can be pro-
grammed.
•
Push the PGM button (13). "P-01" and "PROGRAM" will be displayed.
•
Use the buttons SKIP
(26 / 25) and the 10-digits keyboard (20) to select the corresponding track.
•
Push the PGM button (13) to save the track. "P-02" and "0 Track" will be displayed.
•
Use the buttons SKIP
(26 / 25) and the 10-digit keyboard (20) to select the next track.
•
Push the PGM button (13) to save the track. "P-03" and "0 Track" will be displayed.
•
Repeat the individual steps of track selection and storage until all desired tracks were stored.
Содержание CMP-960USB
Страница 87: ...87...
