Version 07/12
AD-001 LINE I/O USB adaptor
Item no. 31 19 27
Intended use
1.
The adaptor is designed to digitize analogue audio signals and send them via USB interface to a computer.
This product can also take care of the reverse action and convert digital audio data into analogue signals
through the USB interface of a computer. This way it can be used as an external sound card.
The adaptor is also suitable for use with turntables with a LINE output. But turntables with a phono output are
not supported.
The adaptor is powered through the USB interface. It can only be used in closed rooms, and therefore not
outdoors. Any contact with humidity, such as in damp areas, should always be avoided.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them.
Make this product available to third parties only together with its operating instructions.
Delivery content
2.
LINE I/O USB adaptor
•
Cinch (RCA) cable (1.5 m)
•
Software CD (Audacity)
•
Operating instructions
•
Safety instructions
3.
Read the operating instructions carefully and especially observe the safety information. If
you do not follow the safety instructions and information on proper handling in this manual,
we assume no liability for any resulting personal injury or damage to property. Such cases
will invalidate the warranty/guarantee.
Persons / Product
The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. These may become dangerous playing material
•
for children.
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
•
flammable gases, vapours and solvents.
Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
•
accidental use. Safe operation can no longer be guaranteed if the product:
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
-
Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the
•
product.
Also observe the safety and operating instructions of any other devices which are connected to the
•
product.
Miscellaneous
Consult an expert when in doubt about operation, safety or connection of the device.
•
Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified
•
shop.
If you have questions which remain unanswered by these operating instructions, contact our technical
•
support service or other technical personnel.
Installation of software
4.
You can record audio using the included audio recording software. Install the software, following the
•
instructions of the installation programme. You can find further information on the software functions in the
help menu and in the operating instructions of the software. These are available at the following links:
http://audacity.sourceforge.net/help/documentation
http://lame.sourceforge.net/
The adaptor can of course also be used in conjunction with any other audio recording software. You do not
•
necessarily have to use the supplied programme.
Operation
5.
Only connect devices with the same analogue connections to the audio jacks.
If your devices do not have the required input or output jacks, you should use a suitable
adapter.
Only use suitable cinch cords for the wiring. If in doubt, consult an expert.
Carefully read the input and output connection and/or compatibility section in the relevant
operating instructions of the devices that are to be connected to the adapter.
Failure to comply with these instructions can lead to damage to the adaptor or any
connected devices.
Turn off the audio devices prior to connecting them to the connections sockets, and only
turn them back on after you have completed all the connections, and have double checked
them.
Stick to the same procedure when changing the connection to any of the devices.
Connection for audio recording
Ensure the IN / OUT switch on the side of the product is set to IN.
1.
Connect the product to a free USB port on your computer.
2.
Make sure that the audio device is switched off.
3.
Using the cinch (RCA) cable, connect the USB adaptor to the audio output of the audio device.
4.
Switch on your audio device.
5.
Start the required audio software and, in its settings, select the adaptor as the audio source.
6.
Connection when used as an external sound card
Ensure the IN / OUT switch on the side of the product is set to OUT.
1.
Connect the product to a free USB port on your computer.
2.
In the control panel of your operating system, select the adaptor as the sound card.
3.
Make sure that the audio device is switched off.
4.
Using the cinch (RCA) cable, connect the USB adaptor to the audio input of the audio device.
5.
Switch on your audio device. You can now output audio signals from your PC via the audio device.
6.
After use, disconnect the adaptor from the audio device.
7.
Disposal
6.
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
Technical data
7.
System requirements:
Windows® 98 / ME / 2000 / XP / Vista™ / 7
USB standard:
2.0 / 1.1
Power consumption:
44 mA
S/N-Ratio:
50 to 65 dB
Distortion factor (1kHz) :
0.5 %
Operating temperature:
-10 to +60 ºC
Dimensions (W x H x D):
40 x 88 x 25 mm
Weight:
30 g
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
The operating instructions reflect the current technical specifications at time of print.
We reserve the right to change the technical or physical specifications.
© 2012 by Conrad Electronic SE.
V2_0712_02-JU
