- 9 -
5.0 How to operate the machine
5.1 How to start/stop the machine
Never start the appliance when the handle is vertical position.
Also a start lock construction is designed, in order to avoid
mistake operating when the handle is in vertical position.
Both hands should be hold on the handle when start the appliance
Figure 4
5.2 How to control the appliance
The side to side movement of the machine is controlled by raising the handle and pressing
down on the handle. To move the machine to the left, press down on the handle slightly. To
move the machine to the right, raise the handle slightly, Please master the key points, it will be
easy to control the appliance.
Start the appliances based on following steps, see Figure 4:
1,Pull up the level, adjust the handle to your suitable position.
2,Press the knob switch (on the rear handle cover)
3,Pull up the start level 1(both sides), start the appliance.
NOTE: In order to make sure the safety operation, this
appliance adapts a special design that the appliance
normally works only the both hands touch the start level at
the same time.
