MBW MK8-120 Скачать руководство пользователя страница 5

- 2 -

Safety Decals (Decal Set #18007)

09867

ENGINE

OIL DRAIN

18006

12573

WARNING

ROTATING PARTS 
can crush and cut.

Keep hands away!

WATER TANK

18002

CAUTION

Machine may fall and cause 

injury or damage if lifted 
improperly.

18004

Lift only by lift hooks

Weight~ #660 (300kg)

13483

CAUTION

Wear approved hearing protection, 
foot protection, eye protection and 
head protection.

STOP

Read the Operating Instructions 
before operating this piece of 
equipment.

Keep unauthorized and untrained 
people away from this 
equipment.

ROTATING & MOVING PARTS!

Make sure all guards and safety 
devices are in place.

Failure to comply could result in serious 

bodily injury.

SHUT OFF

 the motor before servic-

ing or cleaning. 

DO NOT RUN

 in an enclosed area.  

The engine produces carbon 
monoxide, a 

POISONOUS GAS

.

UNLEADED
GASOLINE

17892

OPERATING
INSTRUCTIONS

1. READ OWNER’S MANUAL before attempting to start or operate this 

machine.

2. Check engine oil and trowel gearbox oil.
3. Put engine switch to on.
4. Set throttle at idle position.
5. Choke engine.  A warm engine may not need to be choked.
6. Hold at least one safety switch.  Turn key to ‘Start’ position.
7. After starting:  open choke and allow engine to warm up at idle.
8. Position throttle for various operating

conditions.

9. TO STOP:  Return throttle to idle position; Release both safety 

switches; Turn key to ‘Off’ position.

18005

09867

CAUTION

ROTATING

BLADES CAN 

CRUSH AND CUT

KEEP HANDS 

CLEAR!

18031

09311 (NOT IN DECAL SET)

09867 (NOT IN DECAL SET)

09867 (NOT IN DECAL SET)

18006

12573

18004

18005

18031

18003 (NOT IN DECAL SET)

17892

13483

18002

CAUTION

HOT SURFACE

DO NOT TOUCH

SURFACE CHAUDE

NE PAS TOUCHER

Содержание MK8-120

























Отзывы: