MBW i Wallbox Plus, Руководство пользователя

Страница: 24 / 40

24
Possible causes of errors for a fault (status LED flashes in red)
1. Faults must always be acknowledged by disconnecting the charging cable plug, and may be
triggered by the following causes, for example:
General errors (displayed in red and white)
"white/white/white/red"
Error 1 [0001]
1. The vehicle was disconnected again during
the Wallbox self-tests (status LED lit in
orange).
2. The charging cable plug was disconnected
during the charging process:
The charging cable plug was not correctly
locked – disconnect the charging cable plug
and reconnect correctly, ensuring that it
locks properly.
"white/white/red/white"
Error 2 [0010], version with charging
socket only
BMW fast charging cable not recognised:
Disconnect and reconnect the fast charging
cable; have it checked at the workshop if
necessary.
"white/white/orange/orange"
Error 3 [0011]
Temperature cut-out:
The maximum temperature in the Wallbox was
exceeded. After briefly displaying the error code,
status LED segments S2 and S4 will flash in
orange until the Wallbox has cooled down.