MBS Mortise Lock, Руководство по обслуживанию

Страница: 9 / 50

pg8
MBS Service Manual
Handing Change Instruction
Mortise handing change instruction
Change the latchbolt position
1. Remove special screw with
provided allen wrench
3. Rotate Latch bolt 180˚ and
reinstall into lock, pushing the latch
bolt into the lock and then releasing.
MAKE SURE FOOT IS
UNDER LATCH SURFACE
CANNOT PUT IN LOCK
WITH FOOT ABOVE
LATCH SURFACE
2. Pull latch bolt out of lock
4. Reinstall the special screw
and tighten securely with
the provided allen wrench.
FROM OPPOSITE SIDE
INSERT SPECIAL SCREW
AND TIGHTEN WITH
ALLEN WRENCH
Change the locking slide position
1. Remove 2 screws as shown above
2. Turn lock over to opposite side
and reinstall screws as shown above.
To ensure locking slide does not bind,
manually push to the desired side or
alternate tightening each screw every
2-3 turns.