Page 10
Stand 12/2002
Operating Manual
FA 66 - ME ENG
Alterations reserved
2.2.10
Never use any tools which are not in a perfect condition and make sure that no tools are left on the
machine after completion of settings and maintenance. Tools which fall into the machine may cause
serious injuries and damages.
2.2.11
Note that all Safety Instructions are kept in a legible and visible condition.
2.2.12
Any audible and visible change on the machine in relation to the safety must be reported to the
supervisor or manager of your company immediately.
2.2.13
The operating personnel should be aware that loose clothing, jewellery or hair can cause serious
injuries if caught in the machine.
2.2.14
It is absolutely prohibited to clean rollers, eliminate malfunctions, or to undertake adjustments while
the machine is on operation.
>DANGER< Always activate the EMERGENCY-STOP button.
2.2.15
Make sure that no other person starts the machine while you are working on it.
> DANGER < Always activate the EMERGENCY-STOP button or turn OFF the main switch.
2.2.16
Check all the machine stoppages prior to starting the machine. You should never switch on the
machine without first checking that the machine is in good working order and that no other person
is making adjustments.
2.2.17
Turn off the main switch and secure it, if necessary, with a lock if you are required to undertake
extensive mechanical or electrical maintenance and repair works.
2.2.18
Never open the main or sub-control panel! Only authorized personnel should gain accesss to the
electronic control cabinets as there are no user serviceable parts.
> DANGER < if control cabinet is open! All main terminals could be alive even though the main
switch has been turned off.
2.2.19
Any damaged cables or electrical connections must be reported to the competent authorities of
your company.
2.2.20
Machine connections must be installed in such a manner that no cables, tubes or hoses
are left trailing.
