20
REMOTE CONTROL
If you have left home, you can monitor the room
state on the telephone line by using the
following steps:
1.
Dial your telephone number from a touch
tone telephone.
2.
When the system answers, you must press
and hold ”
*
” for 1 second to skip the OGM,
a beep tone will be heard.
3.
Press the security code to enter the remote
control mode.
4.
Enter ”
*3
” to start room monitor.
5.
The duration of room monitor state is set to
15 seconds .
To change your announcement:
1.
Dial your telephone number from a touch
tone telephone.
2.
When the system answers, you must press
and hold ”
*
” for 1 second to skip the OGM,
a beep tone will be heard.
3.
Press the
security code
to enter the “REMOTE
CONTROL” mode.
4.
Press ”
*1
” to change OGM. The system beeps
and begins recording.
5.
Speak into the telephone in a normal tone of
voice.
6.
When you have finished, press ”
8
” to stop or
press ”
#
” to quit the remote control function.
The system will beep and play your new an-
nouncement. To listen to your announcement
again, press ”
1
” once after the
security code
.
CHANGING YOUR
ANNOUNCEMENT
ROOM MONITOR