17
beep alarm tone will be heard if the code is
correct.
3.
The CBT function ends if it exceeds 45 seconds.
It will then enter ICM recording in “ANSWER
& RECORD” mode, or ends on-line operation
in “ANSWER ONLY” mode or in “SYSTEM
STANDBY” mode.
4.
The corresponding touch tone commands are
as follows:
End CBT functions press ”
#
”.
The CBT code is initially preset to ”
267
”. You
can change the code to any 3 digits from 000 to
999. The procedure of CBT code setup / display
is as follows:
1.
Press the [
REPEAT
] key for about 2 seconds
and release to display CBT code.
The code display / setup will be high digit
first, then middle digit, and then low digit.
2.
Press the [
FORWARD
] or the [
REPEAT
] key to increase or decrease the digit.
3.
Press the [
ANS
] key to select the correct digit.
4.
Repeat step 2 and 3 to change following digit
setup.
5.
If a keypress exceeds 8 second, the setup /
display procedure will be aborted.
6.
Press the [
STOP
] key to quit the CBT code
setup / display.
OPERATION
CBT CODE
CHANGE