manualshive.com logo in svg

MBM PRIMAVERA 28, Руководство пользователя, Страница: 19 / 40

Поделиться
Скачать
MBM PRIMAVERA 28 Скачать руководство пользователя страница 19

PRIMAVERA

 USER MANUAL

p.19

3.9  Error codes

In case of an anomaly, the system reports the problem to the user by displaying a danger icon combined with a 4-char-
acter code that allows you to trace the type of error. 
Depending on the type of anomaly, the system may prevent the   engine from activating or make it run at reduced power. 
Where it is indicated “to request assistance”, the intervention of a specialized technician OLI eBike Systems is necessary.

ERROR CODE

 

DESCRIPTION

0001

COMMUNICATION PROBLEMS WITH THE BATTERY. BATTERY STATUS DATA MAY NOT BE DISPLAYED CORRECTLY. CHECK THAT THE WIRING AND       

CONTACTS ARE INTACT AND CONNECTED CORRECTLY

0101

 COMMUNICATION PROBLEMS BETWEEN THE TRANSMISSION UNIT AND THE GRAPHICAL INTERFACE.

0104

SPEED SENSOR NOT DETECTED. CHECK THAT THE ALIGNMENT BETWEEN THE MAGNET AND THE SPEED SENSOR IS CORRECT.

CHECK THAT THE SPEED SENSOR IS INSTALLED AND CONNECTED CORRECTLY.

0105

NON-COMPLIANT TORQUE METER SIGNAL. THE TORQUE METER SIGNAL HAS A FAULT. LOW POWER OPERATION.

0106

OFFSET TORQUE METER NOT COMPLIANT.

THE SIGNAL FROM THE TORSIOMETER SHOWS AN ANOMALY.

0801

ANOMALY ON THE MOTOR ROTATION SENSORS.

0802

ANOMALY ON PEDAL ROTATION SENSORS.

0804

EXCESSIVE CONTROLLER TEMPERATURE.

THE TEMPERATURE SENSOR INSIDE THE CONTROLLER DETECTED A TEMPERATURE ABOVE THE DANGER THRESHOLD.

Содержание PRIMAVERA 28









































Отзывы:

Нет отзывов