HYPERION
USER MANUAL
p.23
FIG. 6
FIG. 7
1
2
3
3.11 Battery
The bicycle provides pedaling assistance through an electric motor
powered by the battery located in the down tube of the frame struc-
ture (Figure 6)
3.11.1 Battery charge status
You can view the battery charge status directly on the assistance
system management display.
In the event that the battery is removed from the vehicle or you want
to see the state of charge without turning on the assistance system,
in the lower part of the battery there is a button (Ref. I - Figure 6)
which allows, by means of 5 LED lights (Ref. L - Figure 6), to view the
state of charge.
3.11.2 Battery installation and cleaning
To remove the battery, make sure that the assistance system is switched off and proceed as follows:
1- Insert the battery lock / release key in the appropriate lock in the upper left part of the frame, near the handlebar and
turn the keys counterclockwise (Ref. M - Figure 7);
2- Keeping the key turned, release the battery and lift it (Ref.2 - Figure 7). 3- Extract the battery completely taking care not
to hit the frame.
