3.10
PROBLEM
CAUSE/SOLUTION
The system does not turn on
Check if the battery is plugged and in charge
Support does not activate
Check that the selected service level is greater than 0 and that the bat-
tery level is sufficient
The display displays an error
messages
The system has detected an anomaly. Depending on the type of anomaly
the engine may be deactivated or operate at reduced power. For more
information refer to the paragraph "Error codes”
CHAOS
USER MANU
AL
p.19
0805
EXCESSIVE ENGINE TEMPERATURE. THE ENGINE HAS REACHED A TEMPERATURE ABOVE THE DANGER THRESHOLD.
0806
NON-COMPLIANT PERIPHERAL BUS VOLTAGE.
0808
ROTOR LOCKED. THE ENGINE FAILED TO START DUE TO A MECHANICAL BLOCKAGE OR A PROBLEM WITH THE INTERNAL WIRING OF THE DRIVE UNIT.
0809
BATTERY VOLTAGE IS HIGHER THAN THE MAXIMUM ALLOWED.
0810
NON-COMPLIANT CURRENT SENSOR SIGNAL.
0811
THE DRIVE DETECTED AN OVERCURRENT.
1101
COMMUNICATION PROBLEM BETWEEN THE GRAPHICAL USER INTERFACE AND THE DRIVE. CHECK THAT THE WIRING IS CONNECTED CORRECTLY AND
INTACT.
1102
A BUTTON PANEL IS LOCKED IN THE PRESSURE POSITION.
ATTENTION
If following these operations, the
problem persists it is necessary to
go to an assistance center.
