3.9 Error codes
In the event of an anomaly, the system reports the problem to the user by displaying a danger icon combined with a
4-character code that allows you to trace the type of error.
Depending on the type of anomaly, the system may prevent the engine from activating or make it run at reduced power.
Where it is indicated "to request assistance", the intervention of a specialized technician OLI eBike Systems is neces-
sary.
CHAOS
USER MANU
AL
p.18
ERROR CODE
DESCRIPTION
0001
PROBLEM COMMUNICATING WITH THE BATTERY. BATTERY STATUS DATA MAY BE DISPLAYED INACCURATELY. CHECK THAT THE WIRING AND BAT-
TERY CONTACTS ARE PROPERLY CONNECTED AND INTACT.
0101
COMMUNICATION PROBLEM BETWEEN DRIVE UNIT AND GRAPHICAL USER INTERFACE. CHECK THAT THE WIRING IS CONNECTED CORRECTLY AND
INTACT.
0104
SPEED SENSOR NOT DETECTED. CHECK THAT THE ALIGNMENT BETWEEN THE MAGNET AND THE SPEED SENSOR IS CORRECT.
CHECK THAT THE SPEED SENSOR IS INSTALLED AND CONNECTED CORRECTLY.
0105
NON-COMPLIANT TORQUE TRANSDUCER SIGNAL. THE TORQUE TRANSDUCER SIGNAL HAS AN ANOMALY. LOW POWER OPERATION.
0106
OFFSET TORQUE TRANSDUCER NOT COMPLIANT.
THE TORQUE TRANSDUCER SIGNAL HAS AN ANOMALY.
0801
ANOMALY TO MOTOR ROTATION SENSORS.
0802
PEDAL ROTATION SENSOR ANOMALY.
0804
EXCESSIVE CONTROLLER TEMPERATURE.
THE TEMPERATURE SENSOR INSIDE THE CONTROLLER HAS DETECTED A TEMPERATURE ABOVE THE DANGER THRESHOLD.
