LOCKING
ARM
LIFTING
HANDLE
Litho in U.S.A. 1-2015
SEAMER SPECIFICATIONS
AND MAINTENANCE
Seamer will seam 20 to 30 F.P.M. depending on
gauge of panels and pitch of roof.
Seamer has 10 amp., 120 v., AC/DC motor.
All zerk fittings on seamer should be greased
with lithium based grease, once a day during
continuous duty.
Seamer should be cleaned with a nonflammable
solvent, often, to prevent a build-up of galval-
ume or sealant on the rolls.
DO NOT SPILL
CLEANING SOLVENT ON ROOF PANELS.
THIS WILL VOID THE WARRANTIES ON THE
ROOF PANELS FINISHES.
Any adjustments, maintenance, modification, or
repair not otherwise specifically set forth in this
manual, must be conducted by MBCI.
If seamer motor should stop suddenly, check
reset button located on the side of the electrical
box on top of seamer motor.
CONTINUED
RESETTING OF MOTOR COULD BE INDICA-
TIVE OF LOW VOLTAGE AND WILL CAUSE
DAMAGE TO SEAMING MACHINE.
Check
size and length of electric cords. If problem still
persists, use an alternate power source.
SHIPPING INSTRUCTIONS
Replace the seaming machine in the box. All items
should be clean and in proper working condition.
A $50 minimum charge will be assessed for equip-
ment improperly cleaned or damaged.
Return seamer as soon as you are finished. For
seamer pick-up, please call FedEx Freight at 877-
918-6012 extension #5091070. If possible, call
the shipper the day before you are finished.
TOTAL SHIPPING WEIGHT — 177 LBS.
(Electric Seamer & Phase I/Phase II)
HAND CRIMPER SHIPPING WEIGHT - 42 LBS.
DESCRIPTIONS AND SPECIFICATIONS CONTAINED HEREIN WERE IN EFFECT AT THE TIME THIS PUBLICATION WAS APPROVED FOR
PRINTING. In a continuing effort to refine and improve products, MBCI reserves the right to discontinue products at any time or change spec-
ifications and/or designs without incurring obligation.
To insure you have the latest information available, please inquire or visit our Web
Site at www.mbci.com.
Application details are for illustration purposes only and may not be appropriate for all environmental conditions, build-
ing designs, or panel profiles. Projects should be engineered to conform to applicable building codes, regulations, and accepted industry prac-
tices. Insulation is not shown in these details for clarity.
If there is a conflict between this manual and the erection drawings, the erection
drawings will take precedence.
For the most current information available, visit our Web Site at www.mbci.com
Houston,TX
Lubbock, TX
Oklahoma City, OK
San Antonio, TX
Dallas, TX
Atlanta, GA
Phoenix, AZ
Richmond, VA
14031 West Hardy
5711 East FM-40
7000 S. Eastern Ave.
8677 I-10 East
1804 Jack McKay Blvd.
2280 Monier Ave.
660 South 91st Avenue
801 South Ave.
P.O. Box 38217
P.O. Box 10133
P.O. Box 95998
P.O. Box 69
Grand Prairie, TX 75053
P.O. Box 44729
P.O. Box 739
P.O. Box 239
Houston, TX 77238
Lubbock, TX 79408
Oklahoma City, OK 73143
Converse, TX 78109
800/653-6224
Atlanta, GA 30336
Tolleson, AZ 85353
Colonial Heights, VA 23834
877/713-6224
800/758-6224
800/597-6224
800/598-6224
877/512-6224
888/533-6224
800/729-6224
Indianapolis, IN
Omaha, NE
Memphis, TN
Rome, NY
Adel, GA
Salt Lake City, UT
Atwater, CA
Tampa, FL (Sales Office)
1780 McCall Dr.
1011 Ellison Ave.
300 Highway 51 North
6168 State Route 233
1601 Rogers Rd.
1155 West 2300 North
550 Industry Way
402 N. Frontage Rd.
P.O. Box 657
P.O. Box 19085
P.O. Box 366
P.O. Box 4141
P.O. Box 1107
P.O. Box 16027
P.O. Box 793
P.O. Box 2418
Shelbyville, IN 46176
Omaha, NE 68119
Hernando, MS 38632
Rome, NY 13442
Adel, GA 31620
Salt Lake City, UT 84116
Atwater, CA 95301
Plant City, FL 33564
800/735-6224
800/458-6224
800/206-6224
800/559-6224
888/446-6224
800/874-2404
800/829-9324
800/359-6224
