MBC SmartTouchRemote, Быстрый старт

Страница: 6 / 8

6
QUICK START GUIDE – GSM (Cellular)
Network
1. If you have a SIM card with data subscription ,
follow the steps below. (The complete
installation guide and owner’s manual is
available at www.mbc-marine.com. )
1. Register a user account at the remote.
mbc-marine.com portal.
2. Turn off the PIN code of the SIM card and
insert it into the holder at the bottom of the
unit (picture 2) .
3. Connect the DISPLAY socket to the
touchscreen and the UNIT socket to the
main electric board of the A/C unit. Power
up the A/C – the touchscreen should turn
on with a beep.
4. Connect to the Wi-Fi
network “SmartTouchXX”
using your mobile phone
or laptop. The XX ending
of the network name
refers to the last two
letters of the unique ID
of the device (refer to the
sticker on the unit – see picture 1). Type
“smarttouch.local” into the browser’s address
bar (or scan the QR code on the right).
Now you should see the home screen of
the remote controller.
5. Click on “DETAILS” at the bottom, then
“SETTINGS” and then “WIFI/GSM SETTINGS”.
Click on the “GSM: SETTINGS” button, which
gives you the screen shown in picture a3 .
Switch “GSM ENABLE” (1) to “ON”. Ask your
service provider for specific value of the
GSM APN field !
6. Click „BACK” (2). You will see the Wi-Fi/GSM
settings screen ( picture a4) . Set “PORTAL”
(1) to “GSM”, and “LOCAL” (2) to “AP”.
Click “APPLY” (3). If the settings are correct,
the yellow indicator light will blink (local
connection works in AP mode) and green
light will blink slowly (remote connection
works using GSM network).
7. Open the
remote.mbc-marine.com portal
and log in to your account created in step
1. As it will be your first SmartTouchRemote
device, you will land on the page to add a
new device (picture a5) .
8. Click on the “ADD NEW” (1) button and type
the unique ID of the device. If all the above
steps worked, the remote controller will be
connected to your account and immediately