MBA Instruments MLA 900, Руководство по эксплуатации

Страница: 32 / 40

32 MLA 900 Operating Instructions V 2.0 8011381 © MBA Instruments GmbH
Storage, transport
6.1
Correct storage
Please observe these instructions if the MLA 900 is to be taken out of service for more than
3 months:
b
Remove the battery (
→
S. 29, §5.2 ).
b
Keep all the components stored in a dry place at room temperature (15 … 20 °C/
59 … 68 °F).
b
Observe the admissible storage and transport temperature (–20 °C … +60 °C).
6.2
Short-distance transports
b
Wind-up both the probe cable and the ground cable onto the cable brackets of the
display unit.
b
Attach the measuring probe and the ground clamp in the supports on the display unit –
do not detach the cable connections.
b
Use the hand-grip to carry the instrument.
6.3
Correct shipping
If the MLA 900 is to be transported over long distances:
b
Secure instrument: Wind the probe cable and the cable with the ground clamp carefully
onto the cable bracket of the display unit. Attach the measuring probe and the ground
clamp in the brackets of the display unit.
b
Protect the display unit: Protect the display unit against condensation, humidity and
splashing
b
Packing: Stow the MLA 900 in transport case supplied.
b
Observe the admissible storage and transport temperature (
→
§6.1 ).
b
If the instrument is to be sent for repair: observe the notes in §6.4 (
→
S. 33) .
WARNUNG: Damage risks caused by wrong storage
●
At lower temperatures the LC displays in the display unit may freeze,
resulting in the enclosure of the LC display bursting.
●
Lower temperatures affect the flexibility of the probe cables. At low
temperatures avoid bending the probe cables too far as the cable sheath
may become brittle and break.
●
At higher temperatures there is a risk that caustic fluid may escape from the
battery, damaging the electronics. In addition, the LC displays may be
damaged (irreversible blackening).