Bluetooth
Mobile Phone Kit Owner's Manual
4. Perform the following steps on your mobile phone:
a.
Enter the
Bluetooth
menu
.
b
.
Activate the
Bluetooth
function.
c.
Search for
Bluetooth
devices.
d. Select the device labelled ‘MAZDA’.
e.
Enter the following PIN: 0000. This establishes the connection between
your mobile phone and the
Bluetooth
mobile phone kit.
f. Set the mobile phone to accept
Bluetooth
connection requests
automatically without your permission.
If it is not possible to establish a connection, refer to Troubleshooting.
Pairing Multiple Mobile Phones
The
Bluetooth
mobile phone kit can be paired with up to seven mobile
phones, but can only be connected to one mobile phone at a time.
When the ignition is turned on, the
Bluetooth
mobile phone kit searches
for the most recently paired mobile phone. If this phone is not found, the
Bluetooth
mobile phone kit will continue searching for the next most
recently paired mobile phone until a connection is made.
Connecting Your Mobile Phone (After Initial Pairing)
To connect your mobile phone to the
Bluetooth
mobile phone kit:
1.
Move your mobile phone to
within 10 metres of the
Bluetooth
mobile
phone kit,
preferably inside the vehicle.
2.
Ensure that your mobile phone is switched on and the
Bluetooth
function
on your mobile phone is enabled.
Note: Ensure iPod dongle is not connected to iPod.
3.
Switch on the ignition. Ensure the radio is switched ON.
4.
The
Bluetooth
mobile phone kit will search for the last paired phone,
followed by the next
recently paired phone, until a connection is made.
Note: If there are multiple phones in the vehicle which have been
previously paired to the system, you must disconnect the currently
paired phone before you can use the second phone in the vehicle.
Follow the standard pairing procedure to connect the second phone.
07
Owner's Manual Part No: MZDA-A2DP-OM
