Mazda 2007 MX-5 Miata Скачать руководство пользователя страница 262

Страница: 262 / 406

Black plate (262,1)

Vehicles with run-flat tires can be driven
even with a punctured tire under the
following conditions.

Maximum vehicle speed with a
punctured run-flat tire: 90 km/h (55
mph)
Maximum driving distance with a
punctured rum-flat tire: 80 km (49
miles)

CAUTION

The maximum driving distance may be
shorter depending on the driving
conditions.

If a run-flat tire is punctured, carefully
drive the vehicle to the nearest Mazda
Dealer and have the tire changed.

NOTE

A spare tire or Instant Mobility
System (IMS) emergency flat tire
repair kit is not equipped on vehicles
with run-flat tires as standard.

Replacing a punctured run-flat tire
with a new run-flat tire is
recommended.

Do not use run-flat tires and
conventional tires on the same
vehicle.

Vehicle with conventional tires

If the following occurs while driving, it
could indicate a flat tire.

Steering becomes difficult.

The vehicle begins to vibrate
excessively.

The vehicle pulls in one direction. If a
conventional tire is punctured, refer to

“

Tool Storage

”

(page 7-5) and

“

Instant

Mobility System (IMS) Emergency
Flat Tire Repair Kit

”

(page 7-6).

7-4

In Case of an Emergency

Flat Tire

MX-5_8V80-EA-06F_Edition3 Page262
Tuesday, August 29 2006 10:24 AM

Form No.8V80-EA-06F

Содержание 2007 MX-5 Miata























































































































































































































































































































































































































Результаты поиска

Содержание 2007 MX-5 Miata

Отзывы:

Mazda 2007 MX-5 Miata, Руководство пользователя, Страница: 262 / 406

Результаты поиска

Содержание 2007 MX-5 Miata

Отзывы: