Mazda 2007 MX-5 Miata, Руководство пользователя

Страница: 100 / 406

Black plate (100,1)
l
Before lowering or raising the
convertible top, stop in a safe place off
the right-of-way and park on a level
surface.
l
Make sure nothing is on the convertible
top or near the back window when
raising or lowering the convertible top.
Even small objects may interfere and
cause damage.
l
When lowering the convertible top,
make sure objects inside the vehicle
aren't blown away by the wind.
l
Secure all loose objects inside before
driving with the convertible top down.
l
To help prevent burglary or vandalism
and to ensure that the passenger
compartment stays dry, close the
convertible top securely and lock both
doors when leaving the vehicle.
l
Do not drive through an automatic car
wash; it may damage the convertible
top.
l
Do not raise or lower the convertible
top when the temperature is below 5 °C
(41 °F) ; this will damage the
convertible top material.
l
Do not lower the convertible top when
it's wet. If the convertible top dries
while folded, it will deteriorate and
shrink.
l
Lowering the convertible top while it's
wet can also cause water to drip into
the passenger compartment.
l
Do not raise or lower the convertible
top in a strong wind as it could damage
the convertible top or cause an
unexpected accident.
q
Lowering the Convertible Top
1. Make sure the parking brake is applied.
2. Fully open the left and right windows.
3. Turn off the engine.
4. Make sure there are no objects which
have been placed in the area where the
convertible top is to be retracted.
WARNING
Do not place heavy or sharp objects in
the convertible top storage area:
Putting heavy or sharp objects in the
convertible top storage area is
dangerous.
During a sudden stop or collision, they
can become projectiles that might hit
and injure passengers.
5. Pull the top latch outward by pressing
the unlock button to detach the lock.
Make sure the lock is detached.
Unlock button
Top latch
3-42
Knowing Your Mazda
Doors and Locks
MX-5_8V80-EA-06F_Edition3 Page100
Tuesday, August 29 2006 10:23 AM
Form No.8V80-EA-06F