ON-BOARD DIAGNOSTIC
08–02–5
08–02
*1
: Used during seat weight sensor calibration setting. Not necessary for diagnostic.
*2
: When the calibration error is displayed, the error can be cleared by turning the ignition switch to the LOCK
position.
End Of Sie
PS_AB_ST
(Passenger-side side air bag
sensor circuit status)
/
SHRT_GND/
OPEN/
SQ_LOWRES/
Normal
•
Related wiring harness short to power supply:
•
Related wiring harness short to ground: SHRT_GND
•
Related wiring harness circuit open: OPEN
•
Air bag module circuit resistance low: SQ_LOWRES
•
Related wiring harness normal: Normal
2I, 2L
PS_BUKL
(Passenger-side buckle switch
status)
Buckled/
Unbuckled
•
Passenger-side buckle switch on: Buckled
•
Passenger-side buckle switch off: Unbuckled
2H
PS_CURTN
(Passenger-side curtain air
bag module resistance)
Ohm
Under any condition: 1.4—3.2 ohms
2A, 2D
PS_CURT_ST
(Passenger-side curtain air
bag module circuit status)
/
SHRT_GND/
OPEN/
SQ_LOWRES/
Normal
•
Related wiring harness short to power supply:
•
Related wiring harness short to ground: SHRT_GND
•
Related wiring harness circuit open: OPEN
•
Air bag module circuit resistance low: SQ_LOWRES
•
Related wiring harness normal: Normal
2A, 2D
PS_PTENS
(Passenger-side pre-tensioner
seat belt resistance)
Ohm
Under any condition: 1.5—3.1 ohms
2G, 2J
PS_WEIGHT
(Seat weight sensor measured
weight of passenger)
kg
Display of load (body weight) on passenger-side seat
1I
PS1_STAT
(Passenger-side air bag
module (inflator No.1) circuit
status)
/
SHRT_GND/
OPEN/
SQ_LOWRES/
Normal
•
Related wiring harness short to power supply:
•
Related wiring harness short to ground: SHRT_GND
•
Related wiring harness circuit open: OPEN
•
Air bag module circuit resistance low: SQ_LOWRES
•
Related wiring harness normal: Normal
1M, 1P
PS2_STAT
(Passenger-side air bag
module (inflator No.2) circuit
status)
/
SHRT_GND/
OPEN/
SQ_LOWRES/
Normal
•
Related wiring harness short to power supply:
•
Related wiring harness short to ground: SHRT_GND
•
Related wiring harness circuit open: OPEN
•
Air bag module circuit resistance low: SQ_LOWRES
•
Related wiring harness normal: Normal
1A, 1D
PSAB_DepSt
(Passenger-side air bag
module deployment status)
Active/
Inactive
•
Passenger-side air bag module operation (deployment)
enabled status: Active
•
Passenger-side air bag module non-operation (non-
deployment) status: Inactive
1I
PSB_P_ST
(Passenger-side pre-tensioner
seat belt circuit status)
/
SHRT_GND/
OPEN/
SQ_LOWRES/
Normal
•
Related wiring harness short to power supply:
•
Related wiring harness short to ground: SHRT_GND
•
Related wiring harness circuit open: OPEN
•
Pre-tensioner seat belt circuit resistance low:
SQ_LOWRES
•
Related wiring harness normal: Normal
2G, 2J
TRAK_SW
(Seat track position sensor
state)
Forward/
Rearward
•
Front seat front position: Forward
•
Front seat rear position: Rearward
2W, 2X
PID name (definition)
Unit/Condition
Operation Condition (Reference)
Terminal