6
6. VEHICLE DISASSEMBLY
1. Place the vehicle in park with the parking brake set.
2. Disconnect negative battery terminal and wrap tape
around it to insulate.
Passenger side front trim removal
1. Peel back the Seaming Welt.
2. Remove Cap Nut.
3. Remove Front Side trim.
•
Be careful not to damage or lose any parts removed from the vehicle since they will be reused.
Note
Passenger side scuff plate removal
1. Use shaded area to pull (1) and lift (2) Passenger side
Front Scuff Plate to detach Tab A and Clip A.
2. Use shaded area to pull (3) and lift (4) Passenger side
Front Scuff Plate to detach Tab B and Clip B.
Bolt tightening torque: 4.0 - 6.0 N•m (2.9 - 4.4 ft•lbf)
Warning
Front Scuff Plate
Tab A
Hook A
Pin A
Clip A
Pin B
Clip B
Hook B
Tab B
(3)
(4)
(2)
(1)
Vehicle Front
Vehicle front
Cap Nut
Front Side Trim
Front Side Trim
(Backside)
Clip
Weather strip
Clip
Cap Nut
Seaming Welt
Front Side Trim
(Backside)
Clip
Clip
Vehicle Front
Front Side Trim
Negative battery terminal
•
When the negative battery cable is connected during
operation, it may cause electric shock or personal
injuries. Disconnect the negative battery cable before
removal / installation.
