1032601C-4/4
24
LOCK YOUR BIKES TO
THE CARRIER.
ATTACH THE CABLE-LOCK OVER THE
BIKE TUBE AND ONTO THE PIN. LOCK IT.
LOCK CAN BE
STORED.
WHEN LOCK IS NOT
IN USE, PUSH IT
COMPLETELY INTO
THE LOCK-CAP.
NOTE: WITH LAST BIKE LOCKED,
ALL OTHER BIKES ARE SECURE.
MAINTENANCE
USE NON-WATER SOLUBLE
LUBRICANT ON MOVING
METAL PARTS. USE A SOFT
CLOTH WITH WATER AND
MILD DETERGENT TO CLEAN
PLASTIC PARTS.
NOT RECOMMENDED
FOR USE WITH DRIVE
THROUGH CAR
WASHES.
TO FOLD MAST DOWN AND ACCESS THE REAR:
— UNLOAD THE BIKES.
RELEASE SAFETY HOOK
BY PULLING OUTWARD
ON UNTETHERED END.
SLIDE PIN OUT
WHILE
SUPPORTING
MAST.
DON’T FORGET TO
REPLACE PIN AND
SECURE SAFETY HOOK.
– B
i c
y c
l e
–
22
LOAD YOUR BIKE.
• LOAD BIKES IN OPPOSITE
DIRECTIONS.
• YOU MAY WANT TO LOOSEN
CRADLES AND ADJUST BIKE
SPACING.
• DON’T FORGET TO TIGHTEN
THE BOLTS AGAIN!
NEST BIKE’S TOP TUBE INTO
FIRST CRADLE.
– B
i c y
c l e
BE SURE STRAPS
ARE SECURED
ONTO CRADLE
HOOKS.
HOOK STRAPS OVER
BIKE’S TUBE.
23
21
INSTALL LOCK PIN AND “E” CLIP.
MANEUVER THE PIN INTO THE HOLE,
BYPASSING THE INTERNAL CABLE.
– B
i
STRAPS CAN BE ROUTED
BETWEEN CABLES AND TUBE.
• BE SURE THE CRADLE STRAPS ARE HOOKED.
• PERIODICALLY CHECK THE HITCH BOLT AND
CRADLES—TIGHTEN IF NECESSARY.
BEFORE DRIVING AWAY:
