1032601C-2/4
11
10
9
7
2
4
1
PUSH BASE ONTO
CARRIER MAST.
ALIGN HOLES IN MAST AND BASE.
AT CENTER HOLE NEAR END: INSERT BOLT
AND WASHER. ATTACH ANOTHER WASHER
AND NUT TO BOLT.
TIGHTEN WITH
ADJUSTABLE
WRENCHES.
INSERT SECOND BOLT
INTO ADJACENT HOLE.
POSITION CLEAR SLEEVE SO
BOLT CAN PASS THROUGH.
ATTACH NUT.
3
6
5
TIGHTEN WITH
ADJUSTABLE-END
WRENCHES.
WARNING:
DO NOT
OVERTIGHTEN
THIS BOLT!
INSERT PIN INTO
HOLES IN PLATES AND
THROUGH MAST.
SECURE WIRE
ONTO END OF
HITCH PIN.
ATTACH BASE TO HITCH.
THE HOLE IN HITCH MUST
ALIGN TO HOLE IN
CARRIER BASE.
INSERT HITCH BOLT AND
WASHER FROM LEFT TO RIGHT.
INSTALL HITCH BOLT AND LOCK-WASHER.
USE A 3/4 INCH SOCKET
WRENCH AND TIGHTEN.
ATTACH THE HITCH LOCK,
LOCK THE CARRIER TO THE VEHICLE.
• INSERT THE KEY, LOCK THE HITCH LOCK.
• CLOSE THE LOCK CAP.
8
• POSITION FLAT SURFACE OF HITCH NUT
INTO HITCH NUT HOLDER.
• SLIDE INTO CARRIER’S HITCH END.
• BOLT SHOULD ENTER AT ROUNDED SURFACE
OF NUT, NOT THE HOLDER.
