Mazda CX-7
－
27
Installation of SIRIUS only
1. Wrap the iPod connector with the sponge and vinyl tape.
2. Wrap the electro taps (CAN wires for iPod) with the
sponge and vinyl tape.
3. Cut the harness tube of the audio 24-pin connector as
shown in the figure.
4. Cut the harness tube of the vehicle wiring harness as
shown in the figure.
5. Bend back the harness tube, move the AUX or Bluetooth
H/F connector harness, and change the branch point.
6. Wrap the cut harness tube and the vehicle wiring harness
with vinyl tape.
7. Wrap the cut harness tube and the AUX or Bluetooth H/F
connector harness with vinyl tape.
Vehicle front
Harness tube
(Audio connector)
70 {2.75}
mm {in}
•
When cutting the harness tube, be careful not to
damage the wiring harness.
If not, it may cause a short, accident, or fire.
CAUTION
•
When cutting the harness tube, be careful not to
damage the wiring harness.
If not, it may cause a short, accident, or fire.
CAUTION
•
Do not apply excessive force to the wiring harness as
it could cause an open circuit.
CAUTION
Harness (H5)
(iPod connector)
Vinyl tape
Sponge
Harness (H5)
(electro taps)
Vinyl tape
Sponge
Vehicle front
Vehicle wiring harness
50 {1.96}
mm {in}
Harness tube
(Vehicle wiring
harness)
Vinyl tape
Vehicle wiring
harness
AUX or Bluetooth H/F
16 pin connector harness
