Mazda CX-7
－
26
20. Bundle the harness (H5) redundant part and secure it
using a tie wrap (large).
21. Press in the bundled wiring harness (H5) between the
dashboard and the A/C unit.
22. Install the audio unit in the reverse order of removal.
23. Tighten the harness (H5) GND wire using the vehicle bolt.
•
Bolt tightening torque:
6.9 – 9.8 N
･
m {71.0 – 99.0 kgf
･
cm
・
61.0 – 86.0 in
･
lbf }
24. Bundle the redundant part of iPod connection cable and
secure it to the vehicle harness using a tie wrap (large).
Vehicle wiring harness
Vehicle front
Tie wrap (large)
Remove connector cover when connecting
iPod; fit connector cover when iPod is not used
Put iPod connection cable in glove box
(Cable 300 {11.81} from dashboard member)
Tie redundant part
Antenna cable
mm {in}
ⓔ
Audio unit
Screws
Vehicle front
Screws
Bolt
Harness (H5)
GND wire
Audio 24-pin connector
Hazard switch connector
Harness (H5) 16 pin connector
Vehicle front
Tie redundant part
(Harness (H5))
Tie wrap (large)
A/C unit
Dashboard
