3
M600 / ZENIT 60 / ACTIVE X6 / ACTIVE ULTIMATE Robotic Pool Cleaner
|
User Instructions
To reduce the risk of electric shock replace damaged cord immedietely.
Do not use extension cord to connect unit to electric supply; provide a properly located outlet.
Please ensure that the following PRECAUTIONS are implemented:
Operator should keep hands away from driving belt mechanism.
Position the Caddy and power supply at least 3.5m/12ft from pool’s edge – during operation.
For continued protection against possible electric shock, the power supply unit should be placed
at least 11cm/4in above ground.
When lifting the Robot Pool Cleaner, take care to prevent back injury.
Do not bury cord – locate cord to minimize abuse from lawn mowers, hedge trimmers and other
equipment.
This Robot is for use with permanently installed pools. Do not use with storable pools.
A permanently installed pool is constructed in or on the ground or in building such that it cannot
be readily disassembled for storage and reassembled to its original integrity.
3.1 Water Conditions
Use the Robotic Pool Cleaner in the following water conditions:
Chlorine
Maximum 4 ppm
pH
7.0-7.8
Temperature
6-34°C / 43-93°F
NaCl
Maximum 5000 ppm
3.2 Important: Setting up the Wi-Fi®
To assist you with tips, product updates, and communication with the Dolphin support team, you have
to be connected to the Wi-Fi®.
Please make sure that you have the following:
1. Your home Wi-Fi® network covers the pool area.
2. Your Wi-Fi® router has a sufficient signal strength near the location of the power supply.
3. Ensure that your smart device (phone or tablet) have a Wi-Fi® connectivity.
In case you have a weak signal strength, please use a Wi-Fi® extender.
Note:
The robot’s power supply supports 2.4GHz Wi-Fi® frequency only.
WARNING
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
