background image

2

Dolphin 2x2 Gyro Pool Cleaner 

 |  Operating Instructions

EN

EN

Dolphin 2x2 Gyro Pool Cleaner

Operating Instructions

1.  INTRODUCTION

Thank you for purchasing a Maytronics Robotic Pool Cleaner.
We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and 
cost effective pool cleaning. Its reliable filtration in all pool conditions and all-surface climbing brush 

enhance maximum pool hygiene.
The Robotic Pool Cleaners by Maytronics deliver advanced cleaning technologys, long lasting 

performance and easy maintenance.

2.  SPECIFICATIONS

Motor protection: IP 68
Minimum depth: 0.80m/2.6ft
Maximum depth: 5m/16.4ft

3.  WARNINGS AND CAUTIONS

3.1.  Warnings

• 

Use the originally supplied power supply only

• 

Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth 
leakage interrupter (ELI)

• 

Keep the power supply out of standing water

• 

Position the power supply

 

at least 3m/10ft away from the edge of the pool

• 

Do not enter the pool while the pool cleaner is working

• 

Unplug the power supply before servicing

3.2.  Cautions

When not in use store the Pool Cleaner on the Caddy in a shaded area.
Use the Pool Cleaner in the following water conditions only: 

Chlorine

Max 4 ppm

pH

7.0 - 7.8

Temperature

6 – 34°C (43-93°F)

NaCl

Maximum = 5000 ppm

CAUTION

Содержание 2x2 Gyro











Отзывы: